TUR VARIO mounted, bed plough

An effective protection with a bolt sheared when the ploughshare encounters resistance of 1200 kg. This protection can be used on light soils, stone-free and with small amount of obstacles in the field.

A maintenance-free protection made of steel spring leaves that allow effective tilting of body when the ploughshare encounters resistance of 1300 kg and returns to the preset working depth after its bypassing. They are recommended for heavy and stony soils, with great number of obstacles in the field. The resistance force of the protection can be increased by adding additional spring leaves (depending on the machine type, 5, 7 or 9-leaf springs are available).

The VARIO system allows smooth, continuously variable adjustment of tillage width, which speeds up setting the plough for work and which is performed by means of a side cylinder. It is also possible to adjust the tillage width quickly (35-50 cm) depending of the type of soil.

• IBIS M: Cat. II ø28 mm (825 mm length) or Cat. II ø36 mm (825 mm length)
• IBIS L: Cat. II ø36 mm (825 mm length) or Cat. III ø36 mm (965 mm length)
• IBIS XL / XXL / VARIO / VIS: Cat. III ø36 mm (965 mm length)

Toothed coulter discs with non-stop spring leaf or bolt protection located mostly before the last body or in front of each plough body. They cut furrow-slice from undisturbed soil which makes that the furrow remains smooth and the plant residues are covered better.

New and lighter suspension system. The beam is permanently fixed to the plough during work and is designed for drawing the compacting roller during ploughing. You can disconnect the roller by ejecting the pin with hydraulic cylinder (hydraulic beam) or by stopping the whole tractor/plough unit (mechanica beam).

120 cm long body made of hardened, brittle timber boron steel. It allows full undercut and turning the furrow-slice of up to 45 cm wide at low tillage resistance.

138 cm long body for heavy duty ploughs made of hardened, brittle timber boron steel. It allows full undercut and turning the furrow-slice of up to 55 cm wide at low tillage resistance.

Excellent for various tillage types and for various soil conditions, in all work conditions. The body construction allows layering of wide furrow-slices under wide wheels of the tractors used today and at the same time minimizes resistance and the tractor's power requirements.

Excellent for very heavy, clayey and firm soils. It crushes soil very well at reduced resistance at work.

Excellent for very heavy, clayey and firm soils. It crushes soil very well at reduced resistance at work even with the largest ploughs.

Perfect for variety soil conditions. Its construction allows layering of wide furrowslices and working at depth of 30 cm.

Allows precise setting of working depth and keeping it at given level. It provides better weight distribution, and thus, increases the plough pulling power.

Allows taking the pressure of the tractor, during the transport and helps with transport of plough on highways.

Combines advantages of side support and transport wheel with those of rear wheel. Allows precise setting of working depth, and ploughing the fields with obstacles, and also helps with transport of plough on highways.

(320/60-12) Allows keeping the working depth at a preset level.