RAK 1 / 1,12 single rotary rake
- tandem chassis – Rak 1,12
- torsion suspension frame – Rak 1,12
- adjustment of raking height
- swath limiting screen
- maintenance-free gear
- PTO shaft (6×6, 460 Nm) with unidirectional clutch and with overloading coupling (M=1400Nm)
Accessories at extra charge
|front ground following wheel, RAK 1.12 *||available|
|RAK 1 / 1,12||1||1,12|
|working width [m]||3.8||4,3|
|width of forming roller [m]||0,6÷0,9||0,7|
|no. of rotors [pcs.]||1|
|rotor diameter [m]||2,7||3,35|
|no. of raking arms [pc.]||9||12|
|efficiency [ha / h]||3,4||4,7|
|power demand [HP]||45|
Tandem articulated axle
Ensures smooth ride of rake both at work and during transport.
Swivel wheel suspension
Facilitates rake operation in narrow U-turns.
Height of rotor operation
Adjustable directly on the gearbox by special crank with interlock.
During trips to longer distances, the raking arms can be securely installed in the holes of the middle transport bar.
Ensures safe work and allows adjustment of the swath width within a certain range.
Easy to replace even in the field.
Installation of the raking arms is easy and takes little time.
Raking rollers are hydraulically lifted for transportation.