IBIS VARIO mounted, reversible plough
- hitch axle: ø60-825/ø28 mm with two-stage adjustment (VARIO 3)
- hitch axle: ø60-825/ø36 mm with two-stage adjustment (VARIO 4 / VARIO 5)
- ø120 turntable axis with double-acting cylinder
- 120×120×8 mm frame (VARIO 3 / VARIO 4)
- 140×140×8 mm frame (VARIO 5)
- LONG plough body with trashboard
- bolt protection
- non-stop 7-leaf spring protection (version S)
- hydraulic protection (version H)
- adjustable ploughing width: within the range 35÷50 cm
- side support wheel 10.0/80-12 with wheel shock absorber
- ø480 mm coulter disc with bolt protection
- ø480 mm coulter disc with spring protection (version S / H)
- adjustment of the first furrow-slice width with adjustment screw
- beam tilling cylinder
VARIO in STANDARD version
- interbody clearance: 90 cm
- underbeam clearance: 75 cm, 80 cm (S / H)
IBIS VARIO PLUS
- interbody clearance: 100 cm
- underbeam clearance: 85 cm, 80 cm ( S / H)
- skim coulters for crop residues
|IBIS VARIO 3||available|
|IBIS VARIO 4||available|
|IBIS VARIO 5||available|
|IBIS VARIO PLUS 3||available|
|IBIS VARIO PLUS 4||available|
|IBIS VARIO PLUS 5||available|
|IBIS VARIO S 3||available|
|IBIS VARIO S 4||available|
|IBIS VARIO S 5||available|
|IBIS VARIO S PLUS 3||available|
|IBIS VARIO S PLUS 4||available|
|IBIS VARIO S PLUS 5||available|
|IBIS VARIO H 3||available|
|IBIS VARIO H 4||available|
|IBIS VARIO H 5||available|
|IBIS VARIO H PLUS 3||available|
|IBIS VARIO H PLUS 4||available|
|IBIS VARIO H PLUS 5||available|
Accessories at extra charge
|ACCESSORIES AT EXTRA CHARGE||PRICE|
|surcharge for 1 pair of ZX bodies||available|
|surcharge for a set of BIG LONG bodies (only in PLUS version)||available|
|surcharge for 1 pair of slatted openwork LONG bodies||available|
|surcharge for 1 pair of knife coulters *||available|
|surcharge for 1 pair of extra coulter discs, ø480 mm, springprotected (S/H)||available|
|surcharge for 1 pair of skim coulters for crop residues||available|
|cylinder for 1st furrow adjustment *||available|
|mechanical beam for secondary tillage tool *||available|
|hydraulic beam for secondary tillage tool *||available|
|TERRA H cultivating roller, 2m (450 kg) *||available|
|TERRA H cultivating roller, 2.5m (510 kg) *||available|
|surcharge for rear support wheel, 10.0/80-12 *||available|
|surcharge for rear support and transport wheel, 10.0/80-12 *||available|
|surcharge for side support and transport wheel, 10.0/80-12 *||available|
|surcharge for wide wheel, 320/60-12 *||available|
|spring enhancement with 2 spring leaves, from 7 to 9 (one set per body)||available|
|surcharge for suspension axle, ø60-825/ø36 mm||available|
|surcharge for suspension axle, ø60-965/ø36 mm||available|
|filter for hydraulic hose (per pc.) *||available|
|IBIS VARIO||3||4||5||PLUS 3||PLUS 4||PLUS 4|
|Power demand [HP]||90-120||120-150||140-180||90-120||130-160||150-200|
|IBIS VARIO S||3||4||5||PLUS 3||PLUS 4||PLUS 4|
|Power demand [HP]||100-130||130-160||150-200||100-130||140-170||160-210|
|IBIS VARIO H||3||4||5||PLUS 3||PLUS 4||PLUS 4|
|Power demand [HP]||90-120||130-160||150-200||90-120||140-170||160-210|
An effective protection with a bolt sheared when the ploughshare encounters resistance of 1200 kg. This protection can be used on light soils, stone-free and with small amount of obstacles in the field.
Spring leaf protection
A maintenance-free protection made of steel spring leaves that allow effective tilting of body when the ploughshare encounters resistance of 1300 kg and returns to the preset working depth after its bypassing. They are recommended for heavy and stony soils, with great number of obstacles in the field. The resistance force of the protection can be increased by adding additional spring leaves (depending on the machine type, 5, 7 or 9-leaf springs are available).
A maintenance-free solution that allows adjustment of the protection force and thus, adaptation to the field conditions. Pressure adjustment within the range from 70 to 120 bar allows resistance adjustment per ploughshare required for the body tilting from 800 to 1200 kg.
Turntable axle with doubleacting cylinder
A short and robust head installed in cone bearings that can stand heavy and long term overloads. Head in Model M is supported with plain bearings.
Hydraulically adjustable working width
The VARIO system allows smooth, continuously variable adjustment of tillage width, which speeds up setting the plough for work and which is performed by means of a side cylinder. It is also possible to adjust the tillage width quickly (35-50 cm) depending of the type of soil.
- IBIS M: Cat. II ø28 mm (825 mm length) or Cat. II ø36 mm (825 mm length)
- IBIS L: Cat. II ø36 mm (825 mm length) or Cat. III ø36 mm (965 mm length)
- IBIS XL / XXL / VARIO / VIS: Cat. III ø36 mm (965 mm length)
Coulter disc with protection
Toothed coulter discs with non-stop spring leaf or bolt protection located mostly before the last body or in front of each plough body. They cut furrow-slice from undisturbed soil which makes that the furrow remains smooth and the plant residues are covered better.
Hydraulic adjustment of first furrow-slice setting
It allows quick correction of the first body adjustment.
Mechanical or hydraulic beam for secondary tillage tool
New and lighter suspension system. The beam is permanently fixed to the plough during work and is designed for drawing the compacting roller during ploughing. You can disconnect the roller by ejecting the pin with hydraulic cylinder (hydraulic beam) or by stopping the whole tractor/plough unit (mechanica beam).
TERRA H secondary tillage roller
It is provided with hydraulic adjustment system for folding the tool for transport and pressure adjustment by shifting the plough weight between the operating sections. It can be used for soil compacting during ploughing. It is integrated with the plough when accessing the field and during operation, when rotating. As a standard, it is equipped with spiral roller with ø470 mm dia. and working width of 2 or 2.5 m. At work, cylinder No. 1 lowers the roller down to the stop and for transport, the cylinder lifts the roller up. Cylinder No. 2 is for setting the roller in proper direction. It is also designed for folding the roller, which allows containing the machine within the tractor overall dimensions above the plough.
MX body with trash board
120 cm long body made of hardened, brittle timber boron steel. It allows full undercut and turning the furrow-slice of up to 45 cm wide at low tillage resistance.
ZX body with trash board
138 cm long body for heavy duty ploughs made of hardened, brittle timber boron steel. It allows full undercut and turning the furrow-slice of up to 55 cm wide at low tillage resistance.
LONG body with trash board
Excellent for various tillage types and for various soil conditions, in all work conditions. The body construction allows layering of wide furrow-slices under wide wheels of the tractors used today and at the same time minimizes resistance and the tractor's power requirements.
XL slatted openwork body with trash board
Excellent for very heavy, clayey and firm soils. It crushes soil very well at reduced resistance at work.
LONG slatted openwork body with trash board
Excellent for very heavy, clayey and firm soils. It crushes soil very well at reduced resistance at work even with the largest ploughs.
BIG LONG body with trash board
Perfect for variety soil conditions. Its construction allows layering of wide furrowslices and working at depth of 30 cm.
Rubber side support wheel
200/60 – 14,5 (IBIS M, L, XM)
10.0/80 – 12 (IBIS XL, XXL, VARIO)
Rear support wheel
Allows precise setting of working depth and keeping it at given level. It provides better weight distribution, and thus, increases the plough pulling power.
Side support and transport wheel
Allows taking the pressure of the tractor, during the transport and helps with transport of plough on highways.
Rear support and transport wheel
Combines advantages of side support and transport wheel with those of rear wheel. Allows precise setting of working depth, and ploughing the fields with obstacles, and also helps with transport of plough on highways.
(320/60-12) Allows keeping the working depth at a preset level.